Take Off Rides

/Take Off Rides
Take Off Rides2018-12-24T01:54:15+00:00

Project Description

Main parameters

1.Power: 149kW (Including one hydraulic pump 75 kW, two large-turn 22kW motors, and four small-turn 7.5kW motors. Does not include the power used to decorate lighting and sound.)

2.Capacity: 32 persons

3.Work Height: 9.9m

4.Equipment Height: 6.8m

5.Large turning diameter: 11.5m

6.Small turning diameter: 3.5m

7.Cockpit: 4pcs

8.Rotation speed: 8-12/min

9.Inclination: ≤400

10.Carrying capacity: 384 persons/h

11.Service life: 8 years (Calculated from the date of shipment)

12.Area: 20×20㎡

13.Ground carrying capacity: ≥150KPa  ,  Ground flatness ≤3%

Component Overview

The take off ride consists of a base, a hoisting arm, a swivel arm, a swivel arm lands, a size dial, a seat combination, a transmission system, a hydraulic system, and an electrical control system.

Base: It adopts box structure to increase its rigidity and strength. It has the characteristics of simple structure, stable and beautiful appearance, high rigidity and convenient installation.

Lifting arm: It adopts a box structure, and the bottom and the base are connected by a pin. The middle part is connected to the middle of the base through the oil cylinder, and the tilting angle is raised and lowered during operation.

Slewing arm: It is the main support arm of the big turntable, and also the support arm of the four small turntables.

Slewing arm splicing plate: It is a component that connects the hoisting arm and the large turntable.

Seat combination: It consists of a seat, a safety press bar and so on.

Hydraulic system: consists of a hydraulic motor, a fuel tank, a control section and an actuator that powers the lift cylinder of the equipment.

Transmission system: It consists of a reducer, a transmission gear, a slewing ring, and a swivel arm.

Electrical Control System: A control hub for hydraulic, mechanical and electrical components.

The principle of operation of the device is as follows:

After the passengers are seated on the seat in turn, activate the safety bar locking system and fasten the seat belts one by one and check the tightness of the adjustment bars. After fixing, first press the “up” button to start the hydraulic system, so that the lifting arm drives the large and small turntables to a certain angle, start the small turntable to rotate, and then start the big turntable to rotate. While the large and small turntables are powered off and coasted, press the “Down” button to lower the hoisting arm to the initial position. In the above operation process, the passengers achieve the unique entertainment purpose of making passengers feel thrilled and exciting in the movement of the compound movement direction and the movement speed of different movement speeds.

Quality Control

Our company has a dedicated quality supervision department and a professional inspection team to conduct quality control in strict accordance with standards, drawings and processes. And set up laboratories, measuring rooms, non-destructive testing rooms, heat treatment rooms, electrical testing rooms, parts testing rooms, finished product inspection rooms to ensure product quality.

More

About Us

Our company  has developed 6 kinds of 10 types of amusement equipment, with its original structure, unique amusement effect, high cost performance

More

Product Inquiry